S355jr Steel (1.0045 Material) Steel Round Bar/Steel Sheet/Steel Strip/Steel Flat/Steel Discs/Steel Blank

• Customization: Available
• Type: Carbon Steel Bar
• Standard: AISI, ASTM, DIN, JIS, GB, BS
• Model NO.: carbon steel
• Composition: Stainless Steel Scrap
• Technique: Forged
• Shape: Bar
• Surface Treatment: Polished
• Special Use: High-strength Steel Plate, Wear Resistant Steel, Silicon Steel, Cold Heading Steel, Free Cutting Steel, Mold Steel
• Application: Die Steel Bar
• Transport Package: N/M
• Specification: 6-400mm
• Trademark: Smooth
• Origin: China
• HS Code: 7228400000
• Production Capacity: 5000ton/Month

Product Description

Product Description

S355JR Steel (1.0045 Material) Properties & Equivalent

EN10025 S355JR Steel (1.0045 Material)

S355JR steel (1.0045 material) is one of the quality grades in S355 steel group, the steel has a minimum yield strength of 355 MPa (51 ksi) when the thickness is ≤16mm, and the minimum impact energy 27J at room temperature 20 °C (68 °F). The S355 steel group also includes other quality grades such as: S355J0, S355J2 and S355K2.

S355JR Material Properties

S355JR material properties are listed in the datasheet below, including chemical composition, physical and mechanical properties, etc.

Chemical Composition

Chemical composition based on heat analysis.

Chemical Composition, % (≤)
Standard	Steel (Material Number)	C	Si	Mn	P	S	Cu	N	Method of deoxidation
EN 10025-2	S355JR (1.0045)	0.24	0.55	1.60	0.035	0.035	0.55	0.012	Rimming steels not allowed

 

Chemical Composition (Product Analysis), % (≤)
Standard	Steel (Material Number)	C	Si	Mn	P	S	Cu	N	Method of deoxidation
EN 10025-2	S355JR (1.0045)	0.27	0.60	1.70	0.045	0.045	0.60	0.014	Rimming steels not allowed

Note:

• For carbon content (C) and nominal thickness (t), C by agreement when sections with nominal thickness > 100 mm.
• For long products the P and S content can be 0.005 % higher.
• If the chemical composition shows a total aluminum (Al) content of ≤0.020% or acid-soluble Al ≤ 0.015%, or if sufficient other nitrogen-binding elements are present, the N maximum does not apply. In this case, the nitrogen-binding element should be mentioned in the inspection document.

Mechanical Properties

S355JR mechanical properties at room temperature are listed in the datasheet below, including tensile strength, yield strength, and elongation, etc.

Yield Strength, Mpa, ≥
Steel Grade (Material Number)	t≤16	16< t ≤40	40< t ≤63	63< t ≤80	80< t ≤100	100< t ≤150	150< t ≤200	200< t ≤250	250< t ≤400
S355JR (1.0045)	355	345	335	325	315	295	285	275	265

 

Tensile Strength, Mpa, ≥
Material (Steel Number)	t<3	3 ≤ t ≤ 100	100 < t ≤400
S355JR (1.0045)	510-680	470-630	450-600

Note:

• 1 MPa = 1 N/mm2
• t = Nominal Thickness (mm)

Physical Properties

• Density: 7.85 g/cm3 (0.284 lb/in3)
• Melting point: 1450-1530 °C (2640-2800 °F)

Elongation

Minimum percentage elongation after fracture

Elongation after fracture (%, ≥), L0 = 80 mm
≤1	1< t ≤1.5	1.5< t ≤ 2	2< t ≤ 2.5	2.5< t < 3	Orientation of test pieces
14	15	16	17	18	Parallel
12	13	14	15	16	Transverse

 

Elongation after fracture (%, ≥), L0 = 5.65 √So
3≤t≤40	40< t ≤63	63 < t ≤100	100 < t ≤ 150	150 < t ≤ 400	Orientation of test pieces
22	21	20	18	17	Parallel
20	19	18	18	17	Transverse

Material S355JR Equivalent Steel Grades

S355JR steel equivalent ASTM, German DIN, ISO, Australian, Canadian, Chinese and Indian standard are listed in the table below.

S355JR Steel Equivalent Material

European Union

USA

Germany

ISO

Australia

Canada

China

Indian

Standard

Grade (Material Number)

Standard

Grade

Standard

Grade

Standard

Grade

Standard

Grade

Standard

Grade: SI (Imperial)

Standard

Grade

Standard

Grade

EN 10025-2

S355JR (1.0045)

ASTM A992/A992M; ASTM A572/A572M

A572 Grade 50 [345]; A992

DIN 17100

St 52-3

ISO 630-2

S355B

AS/NZS 3678

Grade 350

G40.20/G40.21

350W (55W)

GB/T 1591

Q345B

IS 2062

E350

Notes for standards:

• ASTM A992/A992M: Structural Steel Shapes.
• ASTM A572/A572M: High-Strength Low-Alloy Columbium-Vanadium Structural Steel.
• AS/NZS 3678: Structural steel - Hot-rolled plates, floorplates and slabs.
• G40.20/G40.21: General requirements for rolled or welded structural quality steels.
• GB/T 1591: High strength low alloy structural steels.
• IS 2062: Hot rolled low, medium and high tensile structural steels.
• ISO 630-2: Technical delivery conditions for structural steels for general purposes.

Detailed Photos