AISI SKD12 SKD11 O1 Cold Work Die Steel Plate Round Bar

• Customization: Available
• Type: Round
• Standard: AISI, ASTM, DIN, JIS, GB, BS
• Model NO.: Round bar
• Composition: Stainless Steel Scrap
• Technique: Forged
• Shape: Plate
• Surface Treatment: Polished
• Special Use: High-strength Steel Plate, Wear Resistant Steel, Silicon Steel, Cold Heading Steel, Free Cutting Steel, Mold Steel
• Application: Tool Steel Bar
• Transport Package: Wooden
• Specification: 6-400mm
• Trademark: Smooth
• Origin: China
• HS Code: 7214100000
• Production Capacity: 5000 Ton/Year

Product Description

 

Chemical Composition(%)

C	Si	Mn	P	S	Cr	W	V
0.85-1.00	0.10-0.50	1.00-1.40	≤ 0.030	≤ 0.030	0.40-0.70	0.40-0.60	≤ 0.30

Description
This alloy is one of the cold work, oil hardening type tool steels. It is relatively inexpensive
containing small amounts of manganese, tungsten and chromium. Hardening by oil quench
minimizes distortion and cracking.

Applications
Applications include short run tooling for blanking dies, cold forming dies and cutting tools
operating at ambient temperature. For working tools, cutting blades, sizing and stamping tools.

Physical properties (avarage values) at ambient temperature
Density [g/cm³]: 7.85
Thermal conductivity [W/m.K]: 30.0

Coefficient of Linear Thermal Expansion 10^-6 oC^-1
 

20-100^oC	20-200^oC	20-300^oC	20-400^oC	20-500^oC	20-600^oC	20-700^oC
12.1	12.9	13.3	14.0	14.4	14.8	14.9

 
Continuous Cooling Transformation (CCT) Diagram
Soft Annealing
Heat to 740-770^oC, cool slowly in furnace. This will produce a maximum Brinell hardness of 230.

Hardening
Harden from a temperature of 780-820^oC followed by oil, warm bath (180-220^oC) quenching.
Hardness after quenching is 64 HRC.

Tempering
Tempering temperature: See the data bellow.

Tempering Temperature (^oC) vs. Hardness (HRC)
 

100^oC	200^oC	300^oC	400^oC	500^oC	600^oC	650^oC
64	61	56	51	44	37	34

 
Tempering Diagram

Forging
Hot forming temperature: 1037-875^oC.
Machinability
Machinability of this alloy is very good. It has a rating of 90% that of the W group water hardening
low alloy tool steels.
Corrosion Resistance
This is a relatively simple steel alloy and does not resist ordinary corrosion. It will rust unless
protected.
Welding
This alloy is weldable by standard means. Consult the alloy supplier for details and procedures.