Hot Working Tool Steel H11/1.2343/SKD6/ X38crmov5-1/4Cr5MoSiV/4h5mfs/Z38cdv5 Round/Flat/Block/Hollow Bar

• Customization: Available
• Type: Round
• Standard: AISI, ASTM, DIN, JIS, GB, BS
• Model NO.: Round bar
• Composition: Stainless Steel Scrap
• Technique: Forged
• Shape: Plate
• Surface Treatment: Black or as Required
• Special Use: High-strength Steel Plate, Wear Resistant Steel, Silicon Steel, Cold Heading Steel, Free Cutting Steel, Mold Steel
• Application: Tool Steel Bar
• Surface Condition: Bright/Black/Grind
• Applications: Mold
• Process: Eaf+Laf+Vd+ESR+Efs
• Transport Package: Wooden
• Specification: 6-400mm
• Trademark: Smooth
• Origin: China
• HS Code: 7228400000
• Production Capacity: 5000 Ton/Year

Product Description

Product Description

About Product

AISI H11 Tool Steel | 1.2343 | X37CrMoV5-1 | SKD6 | BH11

AISI H11 tool steel is a 5% chromium hot work tool steel that is represented by its excellent impact toughness. Chromium hot-work tool steels are designated as group H steels according to the AISI classification system, and specified in ASTM A681 standard. The most commonly used chromium hot-work steels are H11 tool steel, h12 tool steel, and H13 steel, within the series from H1 to H19.
If we compare between H11 and H13, H11 tool steel consists of less vanadium than the commonly used H13 hot work tool steel. This gives H11 steels the higher toughness, with some reduction in wear resistance and temper resistance. H11 tool steel is a deep-hardening, air-hardening steel and H11 alloy steel could be deep hardened by heat treatment and air-quenching. That gives minimal size change during heat treatment. H11 how work steel also has super resistance to thermal fatigue cracking and superb resistance to gross cracking and thermal shock when water cooled in service.
2.AISI H11 Tool Steel Standard and Relevant Steel Specifications

Country	USA	German	Japan	British
Standard	ASTM A681	DIN EN ISO 4957	JIS G4404	BS 4659
Grades	H11/T20811	1.2343/X37CrMoV5-1	SKD6	BH11

3.H11 Tool Steel and Equivalents' Chemical Composition

ASTM A681	C		Mn		P	S	Si		Cr		V		W	Mo
H11/T20811	0.35	0.45	0.20	0.60	0.03	0.03	0.80	1.25	4.75	5.50	0.30	0.60	…	1.10	1.60
DIN ISO 4957	C		Mn		P	S	Si		Cr		V		W	Mo
1.2343/X37CrMoV5-1	0.33	0.41	0.25	0.5	…	…	0.80	1.20	4.8	5.5	0.3	0.5	…	1.10	1.50
JIS G4404	C		Mn		P	S	Si		Cr		V		W	Mo
SKD6	0.32	0.42	…	0.50	0.03	0.03	0.80	1.20	4.50	5.50	0.30	0.50	…	1.00	1.50
BS 4659	C		Mn		P	S	Si		Cr		V		W	Mo
BH11	0.32	0.40	…	0.40	0.35	0.35	0.85	1.15	4.75	5.25	0.30	0.50	…	1.25	1.75

4. H11 Hot Work Tool Steel Properties
Physical Properties

Properties	Metric	Imperial
Density	7.81 g/cm^3	0.282 lb/in^3
Melting point	1427°C	2600°F

RFQ OF H11 STEEL
Mechanical Properties

Properties	Metric	Imperial
Hardness, Rockwell C (air cooled from 982°C, 45 mins)	52.5	52.5
Hardness, Rockwell C (air cooled from 1010°C, 45 mins)	56	56
Hardness, Rockwell C (air cooled from 1038°C, 45 mins)	57	57
Modulus of elasticity	207 GPa	30000 ksi
Modulus of elasticity (@538°C/1000°F)	159 GPa	23000 ksi
Modulus of elasticity (@204°C/400°F)	190 GPa	27500 ksi
Charpy impact (V-notch; air cooled from 1010°C;535°C temper temperature)	13.6 J	10.0 ft-lb
Charpy impact (V-notch; air cooled from 1010°C;650°C temper temperature)	27.1 J	20.0 ft-lb
Charpy impact (V-notch; air cooled from 1010°C;370°C temper temperature)	33.9 J	25.0 ft-lb
Machinability (1% carbon steel)	75.0 - 80.0%	75.0 - 80.0%
Poisson's ratio	0.27-0.30	0.27-0.30

Thermal Properties

Properties	Metric	Imperial
Thermal expansion (@20-100ºC/68-212ºF)	11.9 x 10^-6/ºC	6.63 µin/in°F
Thermal conductivity (@100ºC/212ºF)	42.2 W/mK	292.9 in/hr.ft².°F

5. Forging of H11 Tool Steels
AISI H11 alloy steels are forged at 1121°C (2050°F). For this type of steels, forging below 899°C (1650°F) is not preferable.
6.AISI H11 Tool Steel Heat Treatment
Annealing of H-11 steel
Anneal at 871°C and slow cool at 4.4°C per hour or less in the furnace.
Tempering of Steel H11
Temper at 537°C to 648°C for Rockwell C hardness of 54 to 38. Double tempering for one hour each time at the selected tempering temperature is recommended.
7.Applications of AISI H11 Tool Steel
H11 alloy steel is often used for highly stressed structural parts such as aircraft landing gear.
Some typical applications: Hot punches, die casting dies, forging dies, hot shear blades, hot gripper dies, and extrusion tooling.
The tools produced from H11 chromium hot-work steels can be cooled using water without damage as these steels have low carbon and alloy contents.
We are reliable supplier of AISI H11 tool steel and we offer and delivery satisfactory quality of H-11 tool steel. Contact us for best offer of AISI H11 steel materials.